Installation, cleaning and maintenance of ceramic tiles
Recommendations for ordering and buying products
Yes, if we observe a few points such as the same thickness of the tile and the use of proper strapping and taking into account the compatibility of the dimensions of the tiles with each other, we can use tiles of different sizes on the same surface.
• Cutting
It is important to choose the cutting method and use quality tools and how to apply gentle pressure and speed during cutting. Marjan Tile Company recommends the wet cutting method for cutting its tiles.
• Drilling
The type of tool, the size of the diameter of the hole and the base on which the drilling is done are important. Diamond drills should be used for drilling ceramic tiles and conventional metal drills should not be used. They should be placed on non-elastic bases without any holes and water should be used during drilling.
No, it is better to use the clause for the following three reasons:
• There is always a slight difference in dimensions between the tiles, which causes them to be calibrated, so the band makes this difference to be resolved.
• If the tiles are not tied, the stresses resulting from the contraction and expansion of the building will cause the tiles to come out.
• There is a possibility that water or pollution can penetrate between the tiles and under them when the banding is not done.
Yes, for this, while we have to ensure the strength of the tiles below, it is necessary to clean the surface of the tiles below and then create a primer coating on the surface and according to the instructions for installing the tiles of Marjan Tile Company, tile the surface. do it
Generally, according to the size of the used tiles, the size of the bands is recommended to be at least 1 mm and at most 10 mm (according to taste).
No, today, with the progress made in the use of pigments in tile adhesives, it is possible to use different qualities of colors in banding, which depends on the customer's taste.
Yes, you can access this item through the sales agents of Marjan tile Company.
To know the price of the products, refer to the sales agencies of Marjan tile company.
While viewing the products and catalogs on the website, you can refer to the sales agencies of Marjan tile company.
از طریق عاملیت های فروش شرکت کاشی مرجان می توانید کاشی های تولیدی این شرکت را خریداری نمائید.
No, orders are supplied only through sales agencies of Marjan tile company.
Guarantee and complaints
Raise your complaints about the purchased product with the agency where you bought the tile from, so that it will be transferred to the Marjan tile company through her, and after checking, the result will be announced to you.
Contact the CRM department of Marjan tile company at phone number 031336281237.
Yes, if after checking the quality assurance unit of Marjan tile company, the non-compliance of the product with the standards has been determined.
Technical specifications of products
Yes, if after checking the quality assurance unit of Marjan tile company, the non-compliance of the product with the standards has been determined.
No, if you pay attention to the same caliber of the products when installing the tiles, there will be no installation problem.
Yes. The ceramic tiles produced in Marjan tile Company are resistant to household detergents and acid and base according to ISO standard No. 10545-13. In addition, the industrial tiles produced in Marjan tile company are resistant to chemicals according to the ISIRI 3051 standard, except for hydrofluoric acid and its derivatives.
Yes, all the products of this company are resistant to freezing, although it is necessary to observe the correct installation principles in the foundation and strapping.
Yes, for this, while we have to ensure the strength of the tiles below, it is necessary to clean the surface of the tiles below and then create a primer coating on the surface and according to the instructions for installing the tiles of Marjan Tile Company, tile the surface. did Yes, tiles with high water absorption (more than 0.5%) are not recommended for all uses, such tiles are mostly used in indoor environments (floor and wall), while tiles with low water absorption (less than 0.5%) is suitable for all uses, including external environments (floors and walls). Marjan tile company is proud to produce tiles with less than 0.5% water absorption to meet all uses for ceramic tiles.
Yes, different glazes are used in the tile production process, and these glazes perform different behaviors against wear and sliding. In Marjan tile company, most of the products are made of glazes that have a high resistance to wear. Also, different glaze models are used to make the products anti-slip.
no The tile production process in Marjan Tile Company is free of toxic and harmful substances.